{"product_id":"rust-oleum-9180-epoxy-metal-primer-grey-5l-kit","title":"Rust-Oleum 9180 Epoxy Metal Primer Grey 5L Kit","description":"\u003cp\u003e\u003cstrong\u003eRust-Oleum 9180 Epoxy Metal Primer, grey: a high build two-pack epoxy primer for bare or blasted metal, supplied as a complete 5 litre kit with 9103 activator.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh build for optimal opacity with 9100 topcoat\u003c\/li\u003e\n\u003cli\u003eTouch dry after just 1 hour\u003c\/li\u003e\n\u003cli\u003eHigh amount of rust inhibitors\u003c\/li\u003e\n\u003cli\u003eEasy 1 : 1 mixing ratio; brush, roller or spray\u003c\/li\u003e\n\u003cli\u003eCorrosion class C4 (high protection); heat resistant to 150°C dry heat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhere to use it\u003c\/h2\u003e\u003cp\u003eOn bare steel, blasted steel and properly prepared galvanised surfaces, or as an intermediate coat. Recoat with 9100 topcoats for protection against corrosion, strong chemicals, spillage and high humidity. Where good UV resistance is needed, Rust-Oleum recommends a 9600 polyurethane topcoat.\u003c\/p\u003e\u003ch2\u003eTechnical details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMixing ratio 1 : 1 by volume (kit supplied matched); induction time 30 minutes\u003c\/li\u003e\n\u003cli\u003ePot life 8 hours for a 5 litre mix at 20°C\u003c\/li\u003e\n\u003cli\u003eTouch dry 1 hour; handle 2 hours; recoat after 16 hours; fully cured 8 days\u003c\/li\u003e\n\u003cli\u003eTheoretical coverage 7 m²\/litre at 75 µm dry (150 µm wet); max. 125 µm dry per coat\u003c\/li\u003e\n\u003cli\u003eBrush for touch-up only; roller (8 mm) up to 10% Thinner 160; airless 5–15%; air-atomised up to 20%\u003c\/li\u003e\n\u003cli\u003eApply at 5–35°C, humidity below 85%, surface 3°C above dew point\u003c\/li\u003e\n\u003cli\u003eMatt; clean up with Thinner 160; VOC 421 g\/l\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eDegrease, then ideally blast to Sa 2½ (max. 50 µm profile). Remove salts and white rust on galvanised steel with Surfa-Etch 108 or sweep blasting. For surfaces to be submerged, blast to Sa 3.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.rust-oleum.eu\/static\/datasheet_9170_9180_en_gb.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload the official 9170\/9180 Epoxy Metal Primer technical data sheet (PDF)\u003c\/a\u003e. Read the safety data sheet and the can label before use.\u003c\/p\u003e","brand":"RUSTOLEUM","offers":[{"title":"Default Title","offer_id":57503489851767,"sku":"9180.5","price":180.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/2085\/9363\/files\/rust-oleum-9170-9180-epoxy-metal-primer.jpg?v=1790794269","url":"https:\/\/www.paintersparadise.co.uk\/products\/rust-oleum-9180-epoxy-metal-primer-grey-5l-kit","provider":"Painters Paradise","version":"1.0","type":"link"}