Revamping Your Home's Look: How to Paint UPVC Windows and Doors

Introduction

Preparing the Surface

Choosing the Right Paint

Application Techniques

Conclusion

 

Introduction

You might be thinking, why bother with painting UPVC? Isn't it supposed to last forever? While it's true that UPVC is a durable material, over time it can fade and lose its lustre. Or you may just want a colour change to modernise your property without the expense of replacing a perfectly good window unit. This may seem like a daunting job but with this simple guide and the right product selection this can be a DIY job that significantly modernises your home.

Preparing the Surface

Before you start painting your UPVC windows and doors, it's important to properly prepare the surface. This will ensure that the paint adheres correctly and lasts longer.

The first step is to clean the surface with warm soapy water and a soft cloth or use Zinsser Degreaser & cleaner . Be sure to remove any dirt, grime, or other debris that may be present. Next, use a fine-grit sandpaper to lightly roughen up the surface. This will help the paint adhere better. Finally, wipe down the surface with a clean, damp cloth to remove any dust or debris from sanding.

Choosing the Right Paint

When it comes to choosing the right paint for UPVC windows and doors, there are a few factors to consider. Many modern paints can be used effectively on UPVC allowing you to have a wide choice of colour and finish but also select different product to fit your budget.

Zinsser Bullseye 1-2-3 primer allows you to use virtually any exterior topcoat on your UPVC Windows and doors but we would suggest using a flexible topcoat to ensure a long lasting finish. Zinsser Allcoat Exterior is a perfect option and is available in 1000s of colours with a choice of Matt, Satin or Gloss finishes.

For an all in one solution Bedec MSP or Barn Paint both can be applied straight to UPVC without need for a separate primer.

If you want a super durable finish that will stand up to repeated knocks for years to come we recommend using a 2 pack paint finish. These paints are more difficult to use ad are generally for spray application only but they are more durable than their single pack equivalents. 

Whichever paint you choose one of the most important things to note is that the finish will need to be given time to cure before subjecting them to everyday wear and tear. For example we recommend not having your windows cleaned after painting for as long as possible. 

Application Techniques

The first step in painting UPVC windows and doors is to clean the surface thoroughly. This will ensure that the paint adheres properly and lasts longer. Use a mild detergent and warm water to wash the surface, and then rinse it off with clean water. Allow the surface to dry completely before proceeding.

Next, apply a coat of primer to the surface. This will help the paint adhere better and provide a smoother finish. Use a high-quality primer that is specifically designed for use on UPVC surfaces. Apply the primer evenly using a brush or roller, and allow it to dry completely before moving on to the next step.

When choosing your paint, make sure to select a high-quality product that is designed for use on UPVC. Look for a paint that is durable, weather-resistant, and provides good coverage. Apply the paint in thin, even coats using a brush or roller, and allow each coat to dry completely before applying the next one.

Finally, once the paint has dried completely, you can remove any masking tape or protective film that you may have applied during the painting process. Take care not to damage the newly painted surface as you do so.

By following these simple steps, you can achieve a professional-looking finish when painting your UPVC windows and doors.

Conclusion

In conclusion, we have learned about the benefits of painting UPVC windows and doors, including increased curb appeal and protection against weather damage. We have also discussed the importance of properly preparing the surface and choosing the right type of paint for the job. Finally, we have demonstrated the proper techniques for applying paint to UPVC fixtures.

We encourage you to take the necessary steps to paint your UPVC fixtures and enjoy the many benefits of a fresh new look. With a little effort and the right tools, you can transform the appearance of your home and add value to your property. Thank you for joining us today and happy painting!