RUSTOLEUM
Rust-Oleum 7500 Alkythane Satin RAL 9005 Jet Black 5L
Rust-Oleum 7500 Alkythane Satin RAL 9005 Jet Black 5L
Couldn't load pickup availability
Rust-Oleum 7500 Alkythane Satin, tinted to RAL 9005 Jet Black – supplied in a 5 litre tin.
About Rust-Oleum 7500 Alkythane
Alkythane 7500 is a high-build, single-pack topcoat from Rust-Oleum Industrial for protecting metal against corrosion. Its urethane-modified alkyd formula keeps drying even in cold conditions, and Rust-Oleum states it gives the same protection in fewer coats than other alkyd systems.
- Single-pack urethane-modified alkyd anti-corrosion topcoat
- Excellent opacity and corrosion protection
- Easy to apply with excellent flow and appearance
- Polyurethane addition for extra durability
- Dries at low temperatures – can be applied from 5°C
- Satin finish
- Touch dry in 2 hours, recoatable after 16 hours, fully cured in 7 days (all at 20°C)
- Theoretical coverage 10.5 m²/litre at 50 µm dry film (95 µm wet)
- Brush, roller, airless or air-atomised spray
- Heat resistant to 90°C dry heat (discolouration may occur at higher temperatures)
Where to use it
Apply to metal surfaces, or over Rust-Oleum primers 769, 569, 1060 or 3202. On properly primed or previously coated surfaces, Alkythane 7500 provides corrosion protection in a light industrial environment. For metal structures in a C4 environment, Rust-Oleum recommends using it in a system with 769 and 1060 or 1080 primers.
Application notes
- Stir thoroughly before use.
- Air, surface and paint temperature 5–35°C, relative humidity below 85%, and the surface at least 3°C above dew point.
- Brush or roller: thin up to 10% with Rust-Oleum Thinner 633; use natural-bristle brushes or 4–6 mm short-nap mohair rollers (rolling may need 2 coats to reach the recommended film).
- Spray: thin with Rust-Oleum Thinner 641 (up to 20% airless, 10–30% air-atomised).
- Maximum 80 µm dry film per coat.
- Clean equipment with Rust-Oleum Thinner 160 or mineral spirits.
- VOC 392 g/l. Read the safety data sheet and can label before use.
Colour: RAL 9005 Jet Black
RAL 9005 Jet Black is a deep black. It is part of the RAL Classic colour standard.
Tinted to order
This paint is tinted to RAL 9005 Jet Black to order. Tinted paint is mixed specially for your order and cannot be returned or exchanged. Colours on screen are a guide only.
Share
