Rust-Oleum 9100 High Performance Epoxy 5L Kit - Tinted Colours

Rust-Oleum 9100 High Performance Epoxy, tinted to your colour and supplied as a complete 5 litre kit of base and activator.

Key features

• High build two-pack gloss epoxy: 125 µm dry per coat, about twice a regular epoxy
• Very resistant to abrasion and chemicals
• High amount of rust inhibitors; corrosion class C4
• For both metal and floors

Where to use it

On manually prepared rusted steel; new, blasted or primed steel; concrete; and compatible previously coated surfaces. It protects against strong chemicals, acids, alkalis and solvents, frequent spillage and chemical cleaning, and high humidity. Primers: 9169, 9170 or 9180 on metal; 5401 or 5421 on porous mineral surfaces; 3333 on very dense surfaces such as ceramic tiles. For UV resistance, Rust-Oleum recommends a 9200 or 9600 polyurethane topcoat.

Technical details

• Mixing ratio 2 : 1 by volume (kit supplied matched); pot life 90 minutes
• Touch dry 6–8 hours; handle 8–16 hours; recoat after 16 hours; fully cured 7 days (20°C)
• Theoretical coverage 7.15 m²/litre at 125 µm dry (140 µm wet); max. 250 µm dry per coat
• Brush or roller (14–20 mm): roller needs 2 coats. Airless tip 0.013–0.021", 150–225 bar. Air-atomised not recommended
• Dilution not normally needed (up to 10% Thinner 160 if required)
• Apply at 0–35°C, humidity below 85%, surface 3°C above dew point
• Heat resistance 100°C dry, 50°C immersion or wet heat

Colour advice

Contact with water or chemicals can cause discolouration, especially in machine-tinted colours. Use bases and activators from the same batch across a project. For floors under heavy abrasion Rust-Oleum recommends standard and medium colours; with deep or bright tones (red, yellow, orange, green, blue etc.) a clear polyurethane varnish should be applied.

Choose your colour

Enter the RAL, BS or NCS reference you need in the special instructions section before checking out.

Tinted to order

This product is tinted to your chosen colour to order. Tinted paint is mixed specially for you and is non-returnable. Colours on screen are a guide only.

Download the official 9100 High Performance Epoxy technical data sheet (PDF). Read the safety data sheet and the can label before use.