RUSTOLEUM
Rust-Oleum Metal Cladding Topcoat 10 Litre - Tinted Colours
Rust-Oleum Metal Cladding Topcoat 10 Litre - Tinted Colours
Enter Colour Required Here We Can Match Any Colour
Couldn't load pickup availability
Rust-Oleum Metal Cladding Topcoat in a 10 litre pack, tinted to the colour you choose.
About Metal Cladding Topcoat
A waterborne, satin-gloss decorative topcoat from Rust-Oleum for metal objects and metal cladding. Rust-Oleum says it improves the life expectancy of metal cladding and leaves a finish that is easy to clean and maintain.
- Water-based satin finish
- High filling and hiding power
- Good flow and appearance by brush, roller or airless spray
- Touch dry 1 hour, handle 5 hours, recoat 8 hours, fully cured 2 days (20°C, 50% RH)
- Theoretical coverage 8 m²/litre at 45 µm dry film (130 µm wet)
- Corrosion class C1/C2 (low protection)
- VOC 128 g/l
Where to use it
As a finish on metal cladding, or on any metal surface primed with Rust-Oleum Metal Cladding Primer, PVDF Primer, Noxyde or Peganox. It can also go directly onto aged Plastisol cladding in good condition, and over sound old paint (lightly abrade glossy coatings first). The surface must be clean and dry.
Application notes
- Stir thoroughly before use.
- Minimum 10°C, maximum 80% relative humidity. Avoid full sun or very hot conditions.
- Brush or roller: apply undiluted, preferably 2 coats; use a short-nap roller.
- Airless spray: nozzle 013–015, 160 bar; dilute with water if needed. Air-atomised spray is not recommended.
- Check wet film thickness; too thick a film, especially in dark colours, can blister.
- On new Plastisol the film may stay slightly tacky.
- Clean equipment with water.
Choose your colour
Rust-Oleum states Metal Cladding Topcoat can be tinted to almost any colour. Please add the colour you need (for example RAL 7016, BS 18B25 or an NCS reference) in the special instructions section before checking out.
Tinted to order
This paint is tinted to your chosen colour to order. Tinted paint is mixed specially for your order and is non-returnable. Colours on screen are a guide only.
Download the official Metal Cladding Topcoat technical data sheet (PDF). Read the safety data sheet and the can label before use.
Share
