1
/
of
1
RUSTOLEUM
Rust-Oleum Noxyde Pegarust Anti-Corrosion Coating
Rust-Oleum Noxyde Pegarust Anti-Corrosion Coating
Regular price
£170.99
Regular price
Sale price
£170.99
Unit price
/
per
Price Includes VAT
Couldn't load pickup availability
Rust-Oleum Noxyde Pegarust is a single-pack, solvent-based elastic coating that acts as primer and topcoat in one, and can be applied in low temperatures and damp conditions.
Key features
- Primer and topcoat in one
- Corrosion protection even at low temperatures or on damp surfaces
- Elastic film that protects against cracking and peeling
- UV and impact resistant
- Excellent resistance to chemical agents in the atmosphere
- Semi-matt finish
Where to use it
On iron, galvanised steel, aluminium, zinc and similar metals. On new galvanised steel and new zinc, apply a coat of Rust-Oleum Metal Cladding Primer or PVDF Primer first.
Technical details
- Theoretical coverage about 2.9 m²/litre per coat at 160 µm dry film (345 µm wet); 2 coats recommended
- Recoat after 24–48 hours; fully cured after 1 week (20°C, 50% RH)
- Solids by volume 46%
- VOC 500 g/l
Application notes
- Degrease if necessary and derust by blasting (Sa2) or mechanical sanding (St3).
- Stir thoroughly before use.
- Can be applied in humid weather; minimum ambient temperature -5°C. On a damp surface apply the first coat by brush or roller.
- Brush, roller or airless spray (nozzle 015, 200–220 bar), all undiluted. Air-atomised spray is not advised.
- Clean equipment with Rust-Oleum Thinner 22.
Download the official Noxyde Pegarust technical data sheet (PDF). Read the safety data sheet and the can label before use.
Share
