Rust-Oleum Pegakote 2-Pack Epoxy Floor Paint Kit - Tinted Colours

Rust-Oleum Pegakote water-based two-pack epoxy, tinted to your colour and supplied as a complete kit of base and activator.

Why Pegakote

• Exceptionally abrasion resistant, with better resistance to hot tyres
• Smooth satin finish
• Resistant to oils and solvents
• Water-based, VOC 1 g/l; equipment cleans with water

Where to use it

Indoors only, on floors and walls in garages, warehouses, showrooms, corridors, indoor car parks and workshops.

Technical details

• Base : activator 4 : 1 by volume, supplied as a matched kit
• Pot life 2 hours; touch dry 9 hours; recoat between 12 and 72 hours; fully cured 5–7 days (20°C)
• Theoretical coverage 6 m²/litre per coat (78 µm dry)

Colour advice

For floors under heavy abrasion Rust-Oleum recommends standard and medium colours. With deep or bright tones (red, yellow, orange, green, blue etc.) a PU varnish such as 9211 or 4900 Polycoat 2K must be applied on top. Roller application can leave markings in dark or deep colours; for a decorative finish use a clear topcoat or airless application.

Preparation

• The substrate must be dry, clean, free from rising damp and sound (min. 15 kg/cm² tensile strength).
• Tiles and power-floated concrete: prime with 3333 or 3366. Very porous or heavily abraded concrete: 5401WB.
• Garages, car parks and garage workshops: mechanical preparation (blasting or diamond sanding) and a first coat of 5401WB or 5401 are required.

Choose your colour

Select the kit size, then enter your RAL, BS or NCS reference in the special instructions section before checking out.

Tinted to order

This product is tinted to your chosen colour to order. Tinted paint is mixed specially for you and is non-returnable. Colours on screen are a guide only.

Download the official Pegakote technical data sheet (PDF). Read the safety data sheet and the can label before use.