Zinsser AllCoat Exterior Solvent Based Satin - Tinted Colours

Zinsser AllCoat Exterior Satin (Solvent Based), tinted to the colour you specify. A high-performance all-surface paint for the long-term decoration of timber, metal, masonry, plastic, concrete and cladding, forming a low-maintenance, water-shedding coating.

It is ideal for redecorating and protecting paintable exterior surfaces: building cladding such as Plastisol and uPVC, wood, steelwork including girders, fencing and railings, and masonry.

Performance

• Can be applied down to 5°C
• Resistant to showers after 1 hour
• Recoat time 3 hours
• Weather resistant, with excellent colour retention
• Contains a biocide to protect the dried coating against fungal degradation
• 15 year lifetime – the film is designed to resist cracking, peeling and blistering for up to 15 years before first maintenance

Suitable surfaces

New or previously painted wood, uPVC, galvanising, steel, aluminium, cladding, stucco, brick, stone, cured concrete, Plastisol and more.

Technical details

• Finish: satin (20% gloss level)
• Touch dry 1 hour, hard dry 16 hours, recoat 3 hours, full cure 7 days (20°C)
• Spread rate 10 m² per litre per coat; 50 microns dry from 100 microns wet
• Volume solids 50%; product weight 1.2–1.3 kg per litre
• Apply by brush, roller or spray at 5–32°C and below 80% humidity (airless tip 0.013–0.017, 1800–2400 psi)
• Thinning not normally required (white spirit, max 10%, for conventional spray); clean equipment with white spirit
• VOC below 500 g/l

Preparation

Surfaces must be clean, sound and free of dirt, dust, grease, wax and loose paint, with all mould and mildew removed. Abrade and degrease very hard or glossy painted surfaces and unweathered Plastisol or powder coatings, thoroughly degrease new galvanised steel, and allow new plaster, cement and stucco 60–90 days to cure. Spot-prime knots and sap streaks with Zinsser B-I-N.

Not suitable for: exterior floors, decks or any surface subject to water immersion. Close the container after each use to prevent skinning.

Choosing your colour

Type the colour you need in the Type Colour Below box above the Add to Basket button: a RAL, BS 4800 or NCS reference, or the colour name. Each tin is tinted to order for you.

• Tinted paint is made to order, so it cannot be returned unless faulty.
• Need more than one tin? Order them together and intermix (box) the tins before use for an even colour.
• Colours on screen are a guide only.