Zinsser
Zinsser AllCoat Exterior Water Based Gloss - Tinted Colours
Zinsser AllCoat Exterior Water Based Gloss - Tinted Colours
Enter Colour Required Here We Can Match Any Colour
Couldn't load pickup availability
Zinsser AllCoat Exterior Gloss in the water-based formula, tinted to order in your chosen colour. A high-performance gloss for the long-term decoration of timber, metal, masonry, plastic, concrete and cladding, it dries to a vapour-permeable, low-maintenance, water-shedding finish.
AllCoat Exterior Gloss is self-priming and bonds to existing glossy paint without sanding, so most projects need no separate primer.
Performance
- Excellent resistance to cracking, blistering and flaking
- Protects against rain and severe weather
- Long-lasting finish with excellent colour retention
- Biocide in the dried coating guards against fungal degradation
- Touch dry and recoatable in 1 hour
Use it on
New or previously painted wood, uPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone and cured concrete.
Technical information
- Spread rate 10 m² per litre per coat; up to 12 m² per litre on non-porous surfaces (sawn timber 4–8, planed timber 8–12)
- Hard dry 4 hours, full adhesion and hardness after 7 days (20°C, 60% RH)
- Film thickness about 40 microns per coat; volume solids 40%; density 1.25 kg/litre
- Apply by synthetic brush, roller or sprayer at 10–32°C and under 85% humidity
- Two coats normally, plus an extra coat on sills and fascias
- VOC 80 g/l; water and detergent clean-up
Surface preparation
Make sure the surface is clean, dry, sound and free from mould and mildew. Remove loose paint and chalky residue, fill holes and gouges, spot-prime knots with Zinsser B-I-N and prime bare ferrous metal with an anti-corrosive metal primer.
Not suitable for: exterior floors, decks or any surface subject to water immersion or prolonged contact with water; new (unweathered) Plastisol; bare PVDF cladding.
Choosing your colour
Type the colour you need in the Type Colour Below box above the Add to Basket button: a RAL, BS 4800 or NCS reference, or the colour name. Each tin is tinted to order for you.
- Tinted paint is made to order, so it cannot be returned unless faulty.
- Need more than one tin? Order them together and intermix (box) the tins before use for an even colour.
- Colours on screen are a guide only.
Share
