Skip to product information
1 of 2

Zinsser

Zinsser AllWeather Exterior Masonry Paint - Tinted Colours

Zinsser AllWeather Exterior Masonry Paint - Tinted Colours

Regular price £79.99
Regular price Sale price £79.99
Sale Sold out
Price Includes VAT
Size

Enter Colour Required Here We Can Match Any Colour

Zinsser AllWeather Exterior Masonry Paint, tinted to the colour you choose. This solvent-based masonry paint is designed for the long-term decoration of bare or previously painted concrete, render, stone and brickwork, and it dries even at low temperatures, so it can be used all year round.

It is self-priming and in many cases bonds to existing paints without sanding, so for many refurbishment jobs there is no need to buy a separate primer.

Key features

  • Can be applied down to -5°C
  • Showerproof in 20 minutes; recoat in 3 hours
  • Excellent resistance to cracking, blistering and flaking, and protection against rain and severe weather
  • Flat matt breathable finish with excellent colour retention
  • Resists attack by alkalis and acid, and resists dirt accumulation
  • Contains a biocide to protect the dried coating against fungal degradation

Where to use it

All exterior masonry surfaces: new or previously painted render, stucco, brick, stone, cured concrete and more.

Technical details

  • Coverage: up to 12 m² per litre on non-porous (previously painted) surfaces; less on porous surfaces. Two coats normally applied.
  • Drying (21°C): recoat 3 hours; full adhesion and hardness in 7 days (longer in cooler conditions)
  • Application: synthetic bristle brush, roller or sprayer (airless: .017" tip, 2000–2500 psi)
  • Apply at -5°C to +32°C air and surface temperature, humidity below 85%; avoid direct sunlight and keep a wet edge
  • Gloss level under 2% at 60°; volume solids 50%; typical 50 microns dry film per coat
  • For bare or porous surfaces, apply a mist coat thinned 10% with white spirit. Clean tools with white spirit.

Preparation

Surfaces should be clean, dry and sound, with a moisture content below 16%. Remove loose or peeling paint and chalky residue, sand the edges of remaining paint smooth, and remove all existing mould and mildew (for example with Blackfriar Fungicidal Wash). New concrete and masonry must cure for at least 30 days. Fill nail holes and gouges before painting.

Not suitable for: exterior floors, decks or any surface subject to water immersion or prolonged contact with water.

Choosing your colour

Type the colour you need in the Type Colour Below box above the Add to Basket button: a RAL, BS 4800 or NCS reference, or the colour name. Each tin is tinted to order for you.

  • Tinted paint is made to order, so it cannot be returned unless faulty.
  • Need more than one tin? Order them together and intermix (box) the tins before use for an even colour.
  • Colours on screen are a guide only.
View full details